Well I promised another update and here it is! The front suspension is now finished, all it needs is a final setup, but I need to reinstall the engine to do that. You can see in the picture below the rocker had to be slightly re profiled due to the adjuster on the damper, but apart from that it all went as planned.
Here you can see the pushrod attachment as well as the droplink for the anti roll bar. I am using the same bar as before which is a bit of luck.
This is a front on shot. You can see the attachment position of the pushrod and the steering arm now in double sheer.
Now all I need to do is finish off the changes to the body, fit the new wing mounts, refit the engine and ancillaries and check it all works before another test. I said there were some fairly major changes afoot!!!
Tags: Suspension
