The ECU, GCU etc all need to be mounted pretty securely, after all they are the most expensive/fragile bits! I had toyed with the idea of not making this panel, weight saving after all, but I decided in the end that I would feel like a complete plonker if they got damaged! However, as this panel is not really adding any extra stiffness, I made it from some thin ally sheet, the same stuff as for the duct bucks. Everything will be velcroed on with that manically expensive stuff, although it is actually quite good! Again this was then removed, keyed, glued and then riveted on.
Tags: Ally Panels
