Continuing on from last week, this week was the turn of the radiator duct. I made this in the same fashion as the oil cooler duct, cardboard tmplates transposed to ally. Unfortunatly this side, due to the extra width, is a little more complicated and had to be made in a few more parts.
Archive for March 23rd, 2009
Radiator Ducting
Monday, March 23rd, 2009
Clutch Slave Cylinder Mounts
Monday, March 23rd, 2009To mount the clutch slave cylinder I needed to make up some pillars and a boss for the three mounting holes. I decided to make the pillars first and then, once mounted worry about the boss. I decided to helicoil some ally tube we had and then glue in a stud one end of the pillar and tap the other end for a bolt.
‘Chopper’ Wheels
Monday, March 23rd, 2009I have designed and had made, due to time constraints, some chopper wheels. These will allow me to monitor all the wheel speeds independently. The fronts will bolt, via a spacer which is to be made, directly to the front axles, whereas the rear are tacked to the CV’s
